NO WEAR - Thanks to the manufacturing with only the most suitable materials and to the structure of the vise components. Developed using computer customised software’s and the experience gained during many years spent working on the specific field. High alloyed quality resistance steel is used in manufacturing all the vises and accessories in order to give maximum rigidity, high performances and no wear.
MODULARITY - All vises and accessories are modular and components of all our vises will interchange with perfect alignment to provide different work holding solutions. With this basic principle the only difference between fixtures with the same width of clamping is the base (whose length determines the maximum opening of the vise), while the rest of components have same dimensions. Through the simple addition or substitution of some particulars You can change the type of clamping as Your needs require using the same fixture purchased before (single clamping, swivel base, double, vertical, smooth or round or flat or rough workpieces, manual, hydraulic or pneumatic).
SPACE SAVING DESIGN - The space saving design and solid construction allow a maximum blocking ratio to total overall dimension of the vise. Furthermore, the weight allows a simple moving from one machine to another.
QUICK CLAMPING - Thanks to the clamping device sliding in the vise base slide (compact rack type) till the proximity of the workpiece. The clamping is completed with the main screw. Besides the manual mechanic system, 4 further interchangeable and independent clamping systems are available: 1- Hydraulic 2- Pneumatic 3- Manual hydraulic 4- Electrical hydraulic. The change needs only few seconds. Independent clamping Two independent clamping devices
Solid guided jaw - Both jaws bodies are built in one solid piece (no slides or key-nuts): in order to guarantee higher rigidity and no bending. Both jaw plates are manufactured with a pull-down angle. This ensures, during the clamping operation, a downward run of the workpiece against the vise base (by dragging) and thus a precise and safety clamping.
Versatility - Fixed jaw with 5x5mm step matchable to the prismatic movable jaw which allows to clamp plates without parallels and round workpieces vertical & horizontal way. Vertical, sideway and gang operation is possible with the appropriate components Unlimited clamping range
Highest accuracies - ±0,02mm - Solid vise base. Every sliding and coupling surface is ground. Centesimal tolerances are guaranteed by checking cycles with CNC measuring machine. The perfect alignment with the machine axis is given by longitudinal and cross keyways or positioning holes, upon specific request, on the vise base. Of course, this allows minimum of set up times and gang operations.
The floating movable jaw allows a fast and safety clamping for rough pieces not perfectly parallels. Our precision modular Vise in the standard version is supplied with the guided movable jaw running parallel along the whole Vise base axis.
The fixed jaw can be turned around 180 degrees, and its back step matches with centesimal accuracy to the prismatic jaw step, in this way the maximum vice opening is increased.
The swivel base with positioning pin for perfect alignment; using the sine bar principle permits setting of angles quickly and accurately with gage blocks. The Vise could be positioned on the swivel base along its whole axis.
All manufactured components of alloy steel.
Manufactured component raw material rolled bars, rolled sheet, casting, forging as required.
Components are treated for wear and rust prevention.
All raw material made available from indigenous sources.
All bought out components from standard manufacturers.
fsdfsf xcvbxcvb
© Copyright 2024 PRS Verse - All Rights Reserved.
Technology Partner - Exontric Systems
.svg)